Load image into Gallery viewer, AllCare Digital TENS Unit
Load image into Gallery viewer, AllCare Digital TENS Unit
Load image into Gallery viewer, AllCare Digital TENS Unit

SKU: 8007518

AllCare Digital TENS Unit

Vendor AllCare
Regular price $163.80
Sale price $163.80 Regular price
Sale Sold out
Unit price
/per 
Out of stock
This is a pre order item. We will ship it when it comes in stock.

General Information

A dual channel digital TENS with memory function that can store the treatment time used by the patients. The Physical Therapist can then check the units to make sure the unit is used as suggested. This device has a large liquid crystal display and press buttons, which is a great design for people who have difficulty reading the small inscription on the panel or turning the small dials. Features: 12 Preset Programs Channel: Dual, isolated between channels Pulse Amplitude: 0-80mA peak to peak into 500 ohm load Pulse Rate: Adjustable, from 1Hz ~ 150 Hz, 1 Hz/step Pulse Width: Adjustable, from 50 uS ~ 300 uS, 10 uS/step Mode: B, N, M, S1, S2 TIMER: Selectable, 15, 30, 60 Minutes Wave Form: Asymmetrical Bi-Phasic Square Pulse Voltage: 0-40 V peak into 500 ohm load Supplied with the following accessories: 1 x Carry Case 2 x TENS Leads 1 x Operating Manual 1 x 9V Battery 1 x Pack of AllCare Self-Adhesive Electrodes (4 Electrodes per pack) ARTG No: 220257


Common Uses

Transcutaneous Electrical Nerve Stimulation (TENS) is used to treat a variety of pain conditions. TENS units are small, battery-powered devices that use low-voltage electrical currents to stimulate nerve cells and increase endorphins


Directions

Step 1: Attach the pads: Place the pads on or around the painful area. You can try placing one pad on the painful area and the other a few centimeters away. Step 2: Turn on the machine: With the pads attached, turn on the machine. Step 3: Adjust the intensity: Start on a low setting and gradually increase the intensity until you feel a slight tingling sensation. The sensation should feel comfortable, not painful. Step 4: Use the machine: You can use the machine for a specific area or for a larger area. For larger areas, you can use more electrodes. Step 5: Turn off the machine: When you're finished, turn off the machine and remove the pad.

Step 1: Clean the unit Turn off the unit and use a soft, slightly damp cloth to gently wipe it down. Avoid using chemical cleaners or rubbing alcohol. Step 2: Remove the lead wires Carefully take the lead wires out of the patches. Pulling on the wires can damage the electrodes. Step 3: Store the patches If you're taking off the patches, gently peel them off your skin and place them back onto the plastic liner. Put the liner and patches in a plastic storage bag. Step 4: Store in a cool, dry place Keep the bag in a cool, dry place until you're ready to use the unit again. Step 5: Charge rechargeable batteries If the unit has rechargeable batteries, charge them according to the manufacturer's instructions. Batteries may lose their charge after being stored for 60 days or more. Step 6: Keep the plastic backing Retain the plastic backing and pouch for storage


Ingredients

Metal, carbon, silicone, hydrogel, and conductive plastic film

Do not use if you are allergic to any of the materials contained within this product. Metal, carbon, silicone, hydrogel, and conductive plastic film


Warnings

This device is intended for use by licensed medical professionals, patients, caregivers, or family members assisting with patient care. Users should be capable of comprehending and executing all instructions, warnings, and precautions provided.

Although it is safe for most people, experts recommend that some groups of people avoid TENS treatment unless a doctor advises its use. This recommendation applies to the following people: Pregnant women: Pregnant women should avoid using TENS in the abdominal and pelvic regions. People with epilepsy: Applying electrodes to the head or neck of people with epilepsy may induce seizures. People with heart problems. People with a pacemaker or another type of electrical or metal implant. Avoid placing the pads on bony areas. They work best on muscle or fatty areas. Clean your skin and let it dry before applying the pads. If you experience redness, itching, or a rash within the first 24 hours, contact your health care provider. Don't put the pads on broken or irritated skin.


Always follow the directions for use.

Please refer to any health and product warnings below.

google maps store locator

{title}

Toggle store list