General Information
Two Channel Muscle Stimulation Unit
Two Channel Muscle Stimulation Unit using digital technology to ensure a more accurate and efficient output. Large LCD screen makes selection of treatment parameters much easier. The AllCare Digi EMS is ideal for:
The re-education and strengthening of weak muscles
Increasing range of motion
Stimulating circulation
Features:
Flip top cover
3 output modes including: Constant, Synchronous, Alternate
Protective strips on both sides of unit
Large LCD showing all settings
Easy to use press buttons control
Simple directions for use inside the cover
Patient compliance meter up to 999 hours
Storage of the last used setting
Easy to open swing cover
Durable stainless steel belt clip
Treatment time countdown
Low battery indicator
Supplied with the following accessories:
1 x Carry Case
1 x AllCare Self Adhesive Electrodes
2 Patient Leads
1 x 9 volt Batteries
1 x Operating Manual
ARTG No: 220257
Common Uses
Electrical muscle stimulation (EMS) is used to treat pain, heal muscles, and improve strength and range of motion.
Directions
Step 1: Attach the pads: Place the pads on or around the painful area. You can try placing one pad on the painful area and the other a few centimeters away.
Step 2: Turn on the machine: With the pads attached, turn on the machine.
Step 3: Adjust the intensity: Start on a low setting and gradually increase the intensity until you feel a slight tingling sensation. The sensation should feel comfortable, not painful.
Step 4: Use the machine: You can use the machine for a specific area or for a larger area. For larger areas, you can use more electrodes.
Step 5: Turn off the machine: When you're finished, turn off the machine and remove the pad.
Step 1: Clean the unit
Turn off the unit and use a soft, slightly damp cloth to gently wipe it down. Avoid using chemical cleaners or rubbing alcohol.
Step 2: Remove the lead wires
Carefully take the lead wires out of the patches. Pulling on the wires can damage the electrodes.
Step 3: Store the patches
If you're taking off the patches, gently peel them off your skin and place them back onto the plastic liner. Put the liner and patches in a plastic storage bag.
Step 4: Store in a cool, dry place
Keep the bag in a cool, dry place until you're ready to use the unit again.
Step 5: Charge rechargeable batteries
If the unit has rechargeable batteries, charge them according to the manufacturer's instructions. Batteries may lose their charge after being stored for 60 days or more.
Step 6: Keep the plastic backing
Retain the plastic backing and pouch for storage
Ingredients
Metal, carbon, silicone, hydrogel, and conductive plastic film
Do not use if you are allergic to any of the materials contained within this product.
Metal, carbon, silicone, hydrogel, and conductive plastic film
Warnings
This device is intended for use by licensed medical professionals, patients, caregivers, or family members assisting with patient care. Users should be capable of comprehending and executing all instructions, warnings, and precautions provided.
Although it is safe for most people, experts recommend that some groups of people avoid EMS treatment unless a doctor advises its use.
This recommendation applies to the following people:
Pregnant women: Pregnant women should avoid using EMS in the abdominal and pelvic regions.
People with epilepsy: Applying electrodes to the head or neck of people with epilepsy may induce seizures.
People with heart problems.
People with a pacemaker or another type of electrical or metal implant.
Avoid placing the pads on bony areas. They work best on muscle or fatty areas.
Clean your skin and let it dry before applying the pads.
If you experience redness, itching, or a rash within the first 24 hours, contact your health care provider.
Don't put the pads on broken or irritated skin.
Always follow the directions for use.
Please refer to any health and product warnings below.
