Baby Brezza Superfast Sterilizer Dryer 1Unit

General Information

• Fastest Steriliser Dryer – Only takes 10 minutes! No planning necessary!
  
• Automatically sterilises & dries 75% faster of bottles, pump parts & accessories
• Includes 12-month warranty; BPA-FREE
• Natural steam kills 99.9% of germs; Products remain sterile for 24 hours when left in unopened steriliser
• Large capacity – holds 6 bottles & 2 pump part sets
• Easy push button control to select from 4 functions: Steriliser & Dryer, Steriliser Only, Dryer Only or Storage System; Stainless steel heating plate (NOTE: requires pre-rinsing to avoid milk residue falling on heating plate)
• Includes measuring cup to easily fill with water

SPECIFICATIONS

• Weight: 2.7 kg

DIMENSIONS

• Product   L: 318 mm x W: 287 mm x H: 340mm
• Product Display Carton L: 326mm x W: 307mm x H: 363mm

Directions

As per instruction manual.

Warnings

- Always unplug the sterilizer dryer before cleaning. - Do not immerse the base, the power cord or the plug in water or other liquids. - Do not clean base under water tap. - Use a soft damp cloth to clean the base and control console. - Never use abrasive pads to clean the plastic parts of the machine. - The Lid, Bottle Tray, and Accessory Tray can be cleaned in hot soapy water. - Mineral residue, particularly in hard water areas, may deposit on the heating plate after a few sterilization cycles. To avoid scale build up, wipe the surfaces with a soft moist cloth after each operation. - Deposits can be removed with scale removers or by leaving 60ml/2oz water and vinegar solution (50/50 water & vinegar mix) on the heating plate for approximately 30 minutes. The plate should then be wiped clean with a clean, dry cloth. Some discoloration spots may remain after cleaning with a vinegar solution, but these are harmless. - Do not use abrasives or solvents for cleaning; they may damage the appliance and the surface of the heating plate. - Before plugging in the sterilizer again make sure the base unit is completely dry. - The filter can be removed and rinsed clean with water once a week. Make sure filter is completely dry before replacing.