General Information
Superior construction, designed for post-trauma or post-operative comfort.
Features:
Lightweight sturdy build ensures optimal support.
Anatomically shaped uprights ensure perfect fit.
Shock pod assists in shock absorption upon heel strike
Soft nylon/foam liner for added comfort
ARTG No: 442290
Common Uses
The Victor Moonboot is intended for use as a support for lower leg, ankle, and toe region, as a fixation of foot and ankle at 90 degrees that allows ambulation.
These products are indicated for use by individuals suffering from any one of the following, or other similar conditions; lower leg fractures, fractures of the metatarsals, ankle sprains, ligament injures, post fractures after initial casting, post-operative procedures, among other musculoskeletal ailments typically seen in an orthopaedic clinic or hospital. Victor Moonboot 1.0 Tall is specifically indicated for soft tissue injuries, Grade 2 and 3 sprains-stable fracture, post-operative use, trauma and rehab.
The Victor Moonboot is intended for short term single patient use and not intended to undergo regular service cycles.
This product was designed to withstand normal use conditions for orthopaedic support, post injury rehab or prevention of further injury. Like all products that are worn by individuals, the extended life of such products is determined by the level of activity and type of activity of the individual.
Directions
1.Unfasten Velcro straps and remove inner soft good liner from boot.
2. Open the soft good liner and place foot inside with the heel fitting snugly into the back portion of the liner. Fasten and wrap foot flaps then the leg portion of the liner. Ensure liner is snug but not constrictive.
3. Gently spread the side struts and place the lower leg into the brace.
4. The ankle should be centered at the struts with the foot and ankle at 90 degrees
5. Fasten the Velcro straps beginning at the toe then moving up the leg. Do not over tighten. As swelling pattern changes throughout the day*, it may be necessary to adjust the straps for comfort. *Due to activities, rest, etc.
6. To remove, simply unfasten the straps without removing them completely from the assembled walker. Unfasten the soft good liner and gently bring the foot and ankle forward and out of the walker. To reapply, place the foot and ankle into the liner and reattach the Velcro closures.
You should keep it in a cool, dry, and safe place, away from direct sunlight and moisture. You can also use a carrying case to protect it from dust and other contaminants.
Ingredients
Aluminum, silicone, EVA, ABS, and plastic. Engineering-grade composite material, sole EVA (Ethylene Vinyl Acetate) foam and rubber, Lining breathable, fabric material.
Do not use if you are allergic to any of the materials contained within this product.
Warnings
Use caution when walking on wet or slippery surfaces to avoid injury. Always consult with your physician or therapist before making changes to the brace. This product is to be used under the supervision of a medical professional. This device is not intended for unsupervised public use.
This product is not intended to be used directly on open wounds or broken skin. If pain and/or numbness occurs, contact your medical professional immediately. Ask prescribing medical professional as to what opposing footwear to use.
Always follow the directions for use.
Please refer to any health and product warnings below.
